14K Gold Plating Solution - Bath
$200.00

14K Gold Solution  This Bath Plating Solution is a hard, acid gold that is specially designed to produce a bright 14K, (99.7% purity), hardened gold plate. This solution can effectively plate to a thickness of 2.5 microns, (100 micro-inches) in a single contiguous deposit.

Theoretical Coverage: One liter contains sufficient gold to cover ~ 800 square inches of area to a thickness of 10 micro-inches. 

What you will need to use this solution properly: 

14K Gold Bath Solution requires a Stainless Steel Anode, voltage meter set to 2-3V (2.7 is optimal). The time to deposit one micron is ~ 5.5 minutes. And the solution should be at 100°F.

Our 14K Bright Gold Solution is an Electroplating Bath Solution that requires the proper equipment and supplies to be used. We recommend our Jewel Master Pro HD which has everything you need.

Check out our New Plating Procedure Chart for details about our products and how to use them. 

Minimum Required Items

  1. A source of direct current voltage with a controllable voltage range of one to six volts, (1 VDC - 6 VDC).
  2. A suitable container to hold the solution. 
  3. An electrode or anode made of the proper material, (see the Technical Data Sheet), to apply the positive electrical charge to the solution.
  4. A means to heat and keep the solution to 100° F.
  5. A common lead or ground clip that will provide electrical connectivity from the negative (-) terminal of the power source and the item being plated.
  6. A plating rack to hold the parts in the solution and provide electrical contact with the negative terminal of the power source.

Safety Data Sheet Information for this product.

Technical Data Sheet for this product.

California residents: Click here for Proposition 65 warning.