Bright Nickel Plating Solution - Bath or Brush
Bright Nickel Plating Solution - Bath or Brush Bright Nickel Plating Solution - Bath or Brush Bright Nickel Plating Solution - Bath or Brush Bright Nickel Plating Solution - Bath or Brush Bright Nickel Plating Solution for Bath or Brush Plating
$25.00

Bright Nickel Plating Solution is an electroplating solution that is designed to plate a hard, bright nickel deposit onto most types of metallic surfaces*. When correctly applied to a properly prepared surface the nickel plate can provide a beautiful, high luster decorative finish by itself. Because of its excellent appearance, hardness, and other physical properties, Bright Nickel Plate is the most common material used as an under plate for subsequent finishes, such as, chrome, gold, rhodium and other types of decorative finishes.

*A few metals such as zinc, stainless steel, and tungsten require special pretreatment before plating with Bright Nickel Plating Solution.

What you will need to use this solution properly: 

Our Bright Nickel Solution requires a bagged nickel anode and the proper equipment and supplies to be used. We recommend electroplating equipment such as our Jewel MasterGold StarUniversal Plater, or the ProLabcm  which will have everything you need to perform this important pre-treatment step. 

For best results we strongly suggest plating at the proper temperature with agitation. Brush results will not get as bright of a finish as you will with bath plating.

STANDARD OPERATING CONDITIONS

CATHODE CURRENT DENSITY                      20-50 Amp/Ft ²

ANODE CURRENT DENSITY                           10-30 Amp/Ft ²

VOLTAGE                                                          5-7 volts (small bath)

                                                                          6-12 volts (Large bath)          

TEMPERATURE                                              135° F - 155° F for best results

 Nickel Deposit Rate                                       Click Here

NOTE: At 40 ASP  you can achieve 2.5 microns in 3 mins and at 30 ASF you can achieve 2.5 microns in 4 minutes.

NOTE: The Bright Nickel Solution contains a brightener/leveling component that may come out of solution at lower temperatures. This can produce a white or light-colored layer of precipitate at the bottom of the container. If this happens the nickel solution will still perform normally as a brush plating solution. However, if the solution is to be used for bath plating then the leveling component needs to be re-dissolved back into the solution. This can be done by warming the solution to 120° F to 140° F and agitating the solution until the leveling component is dissolved. See video below.

Check out our Plating Procedure Chart for details about our products and how to use them.  

Safety Data Sheets (SDS) can be found HERE

Technical Data Sheets (TDS) can be found HERE

California residents: Click here for Proposition 65 warning.


 Plating onto Copper with Bright Nickel and Gold



Customer Reviews
4.9 Based on 11 Reviews
5 ★
91% 
10
4 ★
9% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • process
  • instructions
  • part
  • site
  • problem
  • color chart
  • voltage
  • video
  • purchase process
  • results
AW
03/14/2024
Anthony W.
United States United States

You guys are great!... Have always accommodated my need for plating...

MB
01/30/2023
Miguel B.
United States United States

Clean

Great results

JE
09/20/2022
JAMES E.
United States United States

Excellent service

Quick shipping Friendly staff! Thanks!

PK
06/07/2021
Peter K.
United States United States

Great result for a newbie

First use was on a 3D printed pendant previously plated with bright copper. After about 3 minutes part had a shiny nickel plate. Plating voltage was 3 volts and current around 500ma. Very good result.

Gold Plating Service Bright Nickel Plating Solution for Bath or Brush Plating ReviewGold Plating Service Bright Nickel Plating Solution for Bath or Brush Plating Review
AZ
12/04/2019
Abolfazl Z.
United States United States

Excellent prodcut

I am always happy from this product!