Rose Gold Plating Solution - Brush (Continental US & Canada Only)

Rose Gold - Brush Plating Solution (Cyanide Based) This special Rose Gold electroplating solution is specially formulated to plate a rich rose gold color over existing gold plate (Can plate onto nickel or other surfaces with a similar finish).  Stainless Anode Required. No more than 3 volts is recommended. 

Electro-deposited Rose Gold is an alloy of gold & copper. The gold content is low and is not quantified by karat. There is enough gold to prevent corrosion of the copper which is much harder than gold. This is why properly plated rose gold wears very well. Will plate a jewelry grade thickness.

This solutions can be sensitive to voltage. Recommended voltage is 3 volts. too high of voltage will result in a dark deposit. This solution deposits slow. Make sure sleeve is fully saturated and dip frequently for best results. 

Recommend adding a clear coat or surface protector to surface to help with the longevity.

This product can ONLY be shipped within the Continental US and must be shipped UPS - Ground.

Check out our Plating Procedure Chart for details about our products and how to use them.  

Safety Data Sheets (SDS) can be found HERE

Technical Data Sheets (TDS) can be found HERE

California residents: Click here for Proposition 65 warning.